The MFC is a multifunctional chassis and an assortment of accessories which can be combined in different ways to accomplish the tasks you need done:

  • subsoiler (or ripper) unequal to decompact and aerate your soil;

  • combination subsoiler and chisel plough;

  • chisel plough;

  • zone till.

A field can have compaction zones at different areas and different depths. This compaction can occur for various reasons:

  • repetitive passage of farm equipment;

  • working with heavy equipment;

  • bad buoyancy for farm machinery;

  • the natural structure of the soil.

When there is a water surplus, the compacted zones impede the penetration of water into the soil towards the water basin. Plant roots become submerged in water. During a drought, these same compaction zones prevent humidity from rising up to the plant roots, thus depriving it of an essential element for normal growth. In compaction zones crop yield greatly suffers.

The Subsoiler corrects this problem. However, the problem will inevitably return if the cause is not corrected by modifying the farming practices which created the problem in the first place.

Watch this demonstration video

Walk around the MFC with a combination of subsoiler and chisel shanks...

...and with minimum till shanks and coulters



This MFC combo makes it possible for compaction reduction work with the subsoiler prongs while working the soil surface with the chisel. These chisel shanks can be adjust in height to always work at the depth needed, regardless of the penetration depth of the subsoiler prongs.


The prongs are set up in a sequence pattern: subsoiler, chisel, subsoiler, chisel, etc. This results in a very uniform surface work with a single pass.


Uniform but rough: the shanks don’t breakup the clumps or close the fissure openings. These cracks give free rein for the frost to continue compaction reduction of during the winter season. The frost is your ally in this situation!


No need to de-compact your fields?  Simply lower the adjustable chisel shanks and the rubber depth wheels (situated on each side of the frame) and the MFC becomes a chisel.


The MFC is unmistakably useful in cereal, soybean and corn-silage fields.  Some also use it as a chisel in corn fields containing chopped residue.

Why choose the MFC

  • This machine is of simple design and very robust: working the soil can be hard, at times.

  • The non-stop hydraulic protection system, with its nitrogen tank, is a Cadillac reset system compared to the mechanical or spring loaded reset mechanisms. The gentleness of this system contributes to lessen wear and tear on the various components, not only on the MFC but also the tractor.

  • The MFC is designed for tractors from 80Hp and up.

  • We offer the MFC in 4 standard sizes and 5 different configurations.

  • We can, upon request, customize the MFC to fit your specific needs: wider spacing, accessory configurations, etc.

Ask for more information


LaSole Inc • 290, 1st avenue, Sainte-Hélène-de-Bagot (Québec) Canada J0H 1M0

Toll free: 877.772.5233 • T: 450.791.4007 • F: 450.791.2384 • Email: info@lasole.ca

All rights reserved © 2004-2019 LaSole Inc